Year: 2011
-
Computer-controlled RGB LED Buckyball
Everyone and his brother has built LED cubes before, and while they are unmitigatedly awesome, I wanted to try something a little different. As far as I can tell, nobody has made an LED buckyball before! And of course, the requirements for such a large, sparse shape are a little different. In a typical LED…
-
Fixing an Acer AL2216W LCD Monitor (Delta DAC-19M010 power supply, bad caps)
There are several dozen of this model of monitor at my work since last year or so; the other day I found one on top of the dead electronics plunder pile recycling bin, looking brand new. Googling the model # and terms such as “problems” or “repair” or “won’t turn on” revealed pages of discussion…
-
Slam Stick: dissected!
Woot! It sounds like a gadget I designed will be featured in next month’s EDN magazine (Prying Eyes column). This must be some kind of ironic career turning point: I landed a job by reverse-engineering other peoples’ stuff; now people reverse-engineer my stuff.
-
UVLO, Comparators with hysteresis (now with 20% more equations!)
The Mosquino board is intended to operate from very low-power sources, such as RF, vibration energy harvesting and small thermal gradients (e.g. body heat). Although the ATMega and the rest of the circuit can be put to sleep at < <1uA once they have reached legal operating voltage, many semiconductor circuits fail this test with…
-
Not Dead
Really! Just busy with some real-life stuff, namely wedding related and home renovations. I haven’t forgotten about this pick & place stuff! Lately I’ve been spending most of my project time on getting Mosquino toward an official 1.0 release. The rev2 boards just came in, so once all the parts are in I should have…
-
How to use your own modem with Comcast
Typical frog in a hot pot scenario; when I joined Comcast the modem lease was like $1.50 a month, and I didn’t even think about it. As of recently it’s now crept up to $7.00 a month, which kind of made me sit up in shock. How much do those things actually cost, anyway? Answer:…
-
Motorized SMT tape-and-reel feeder for DIY pick & place
Despite the impact of work, wedding planning and Super Metroid fan-hacks (not necessarily in that order ;-) on my freetime, my scheme to design a DIY-able open pick & place system is starting to come along. So far, there is a proper vacuum placement head, a rough idea of what the software architecture might look…
-
Tape Sprocket Creator
This is a free (open source) Python script for creating feeder sprockets for e.g. perforated tape or film advance. I wrote it for myself to generate SMD tape-and-reel feed sprockets, but it might also be useful for making replacement sprockets for 8/16/35mm film, microfilm and paper-tape systems whose original reader hardware no longer exists or…
-
I P, U P, everybody (DHC)Ps…
My page that tells you your IP address is up and running again, after a PHP configuration change by my web host knocked it out. Anyway, enjoy the glory of finding out your external IP address without getting socked by porn popups!
-
Reversing an aquarium pump
An aquarium air pump can be used as an inexpensive source of low vacuum with a small amount of tweaking. Supplies needed are: The air pump Screwdriver (usually) to open the air pump Hose barb (your favorite size) for vacuum inlet Drill Glue (e.g. RTV/caulk, epoxy, etc.) Of course, you could convert one by sealing…
-
Pick n place head update
This is a quick follow up to the pick & place head article, in which I actually build the darn thing :-) As in, not just fit-test the parts together and take a picture, but actually pick and place some stuff with it. I’ve been busy/lazy, so not too much to show in terms of…